Skip to content

The REAPER Chat page contains the 10 most recent articles on the REAPER DAW. For older articles, use the category link at the bottom of this page.

  • Why Your Mix Feels Cluttered

    If your mix feels cluttered but nothing sounds too loud, the issue is not volume. Learn how separation and structure create clarity.

  • Buses vs Folders in REAPER—When to Use Each

    Buses vs folders in REAPER isn’t about organisation—it’s about signal flow vs structure. Learn when to use each to build clearer, more intentional mixes.

  • Routing in REAPER—It’s Simpler Than You Think

    Routing in REAPER doesn’t have to feel complicated. Once you understand how signal flow works, routing becomes simple, logical, and surprisingly powerful.

  • Does REAPER Need a Powerful Computer?

    Worried your computer isn’t powerful enough for REAPER? In most cases, performance comes down to understanding your system — not upgrading it.

  • REAPER Audio Device Not Showing (Fix Guide)

    REAPER audio device not showing? This step-by-step guide walks through the most common causes, from driver issues to device settings, so you can get your interface recognised and working again.

  • REAPER Gain Staging: Level Control Explained

    Architectural level management for predictable, controlled mixing in REAPER. Introduction Gain staging in REAPER is not about chasing a number. It is about managing level deliberately across the entire signal path so that each stage behaves predictably. The phrase is often reduced to “hit -18 dBFS,” but that interpretation collapses a structural discipline into a…

  • How Signal Flow Works in REAPER

    Signal flow in REAPER isn’t just about where audio travels. It’s about understanding the system architecture that determines what you hear, what gets recorded, and what gets rendered. Once you separate monitoring, recording, and rendering paths, REAPER becomes predictable — and far easier to trust.

  • Understanding REAPER CPU Performance

    REAPER projects can glitch even when CPU usage looks low. This article explains real-time audio deadlines, RT CPU, and why hybrid engines still hit limits.

  • REAPER Has Input But No Sound—Quick Fix Guide

    If you can see input meters moving in REAPER but hear nothing, you haven’t broken anything. This fast, calm checklist helps you trace the signal path, fix common monitoring and routing issues, and get sound back quickly and confidently.

  • REAPER Metering: RMS vs Peak

    RMS and Peak meters tell different stories about your audio. This guide shows how REAPER displays each one, where LUFS fits in, and how to make practical gain-staging decisions that translate across systems.

All Posts by Category